The so-called Guangdong brand luggage hardware accessories, is suitable for luggage hardware accessories, what are the common types of luggage hardware inspection methods? The following Guangdong brand luggage hardware accessories manufacturers for you to answer the types of luggage hardware inspection methods.
1, bag hardware accessories lock class, whether the surface plating is uniform, bright, whether the edges and corners are scratched, whether the insertion is flexible, whether the screw is matched, after the insertion of the lock, it must withstand not less than 18LBS of tension.
2, pull D buckle or circle class: measure the inner diameter of D buckle or circle, measure the thickness of the iron wire, check the close fit of the iron wire interface, whether the hand is scraped, and then the tension test, not less than 15LBS, hand pull D buckle and circle plating is OK, the tension should not be less than 28-60KG, the rest of the same.
- Is it OK to rotate 2.5KG around the conventional 3# pull sheet torque, 4KG around the 5# pull sheet, 6KG around the 8# pull sheet, 8KG around the 10# pull sheet?
4, bag hardware accessories dog buckle test method: electroplating is OK, color difference, switch is flexible, scraper, measure the inner diameter of the dog buckle, measure the thickness of the wire, and then tensile test, decorative dog buckle must withstand not less than 8KG, usually 28-60KG.
5, square buckle class, whether the plating is uniform, scraper, measure its inner diameter, and then measure the width of its wire, must withstand 28-60KG tensile test.
6, magnetic buckle, whether the plating is uniform, scraping, measure its diameter, gasket and ear firmness, magnetic buckle opening and closing must be able to withstand the most loose can not be less than 2LBS, the most tight can not be higher than 8LBS. The same goes for the buckle.
7, needle buckle class, whether the plating is uniform, scraper, needle length is OK, flexible, measure its inner diameter and the thickness of the wire, needle buckle force shall not be less than 28KG.
8, the chain, whether the interface is close, whether the plating is uniform, whether there are signs of oxidation and rust, whether the decorative chain must withstand not less than 15LBS of tension.
9, luggage hardware accessories surface decorative fake drill class, plating surface is uniform, bright, whether the fake drill reflective, off, whether the position between the fake drill is uniform, there are no signs of oxidation rust.
