Belt buckle manufacturers say that the strong belt buckle is used as a belt connection buckle for transportation, and the material is crucial, because the material of the belt buckle is too hard, the belt buckle will damage the belt and scratch the roller, and the material is too soft, which will cause insufficient tensile strength and wear resistance, and shorten the service life of the belt buckle.
The strong belt buckle is made of imported alloy steel with high strength, which also ensures that the belt buckle has enough toughness under the premise of ensuring sufficient strength, thus effectively improving the service life of the belt and drum.
Strong belt buckle Features:
1, the nail thicker, increase the nail spacing, thereby reducing the damage to the joint section, improve the transfer efficiency of Larry.
2, connected structure, easy to carry is not easy to lose, easy to install, tie rod binding speed, no running nails, binding accurate, saving time and effort.
3, strong belt buckle as a belt connection buckle for transportation, the material is crucial, because the belt buckle material is too hard will damage the belt scratch drum, the material is too soft will cause tensile strength and wear resistance is not enough, shorten the service life of the belt buckle.
The strong belt buckle is made of imported alloy steel with high strength, which also ensures that the belt buckle has enough toughness under the premise of ensuring sufficient strength, thus effectively improving the service life of the belt and drum.
All the conveyor belts must be connected into a ring to be used, so the quality of the conveyor belt joint directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly, the common methods of the general conveyor belt joint are mechanical joints, cold bonding joints, hot vulcanization joints, etc.
Generally refers to the use of strong belt buckle joint: this joint method is convenient and convenient, more economical, the efficiency of the joint is high, and the tension is large. In PVC and PVG full-core flame retardant anti-static conveyor belt joints, this joint method is generally used for products below grade 8 belt.
The use of cold adhesive for joint: this joint method can have a better joint effect than the mechanical joint, but the efficiency is relatively low, the cost is high, from a practical point of view, because the process conditions are more difficult to master, and the quality of the adhesive has a very large impact on the joint, so it is not very stable.