Brand:DG Buddy
Size: Custom Dimensions | Material: Zinc Alloy / Solid Brass / Stainless Steel / Iron /Aluminum
Finish: Custom Plating Colors / PVD Options | MOQ: 1,000 pcs (Flexible)
This light gold zinc alloy snap hook clasp uses a side-operated spring gate and a lower eye for detachable bag straps, pouches and accessories. The structure gives designers a more distinctive alternative to a common press-button clasp. Nearly 20 years of manufacturing experience, free stock samples available, OEM customization supported.
A light gold zinc alloy snap hook clasp with a distinctive side-operated spring gate, rotating lower eye, 30 mm nominal size, and OEM development support for detachable bag straps and fashion accessories.
A snap hook clasp is a connector that opens through a hinged gate and closes around a compatible ring, loop or bar. DG-SH030 is a zinc alloy snap hook clasp with a light gold finish, a side-operated spring gate and a 30 mm nominal lower eye for detachable bag straps and fashion accessories. The side lever gives it a different operating experience from a conventional press-button clasp. Buyers should match the approximately 9.5 mm upper opening and 30 mm nominal lower eye to the actual D ring, leather tab or webbing assembly before sampling. The part is intended for handbag and accessory development; load-rated, outdoor or safety-critical claims require separate factory confirmation.

This product is designed for buyers who want a visible metal connector with a softer appearance than bright yellow gold. The light gold finish works with leather, coated canvas, nylon webbing, and mixed-metal handbag collections. Its rounded body and compact 30 mm profile keep the fitting noticeable without making the strap connection look industrial.
The operating detail is the main point of difference. Instead of using the familiar press-button shape associated with many common clasps, the gate is opened and closed through a side-operated lever that moves through its locking position. This gives product developers a clear hardware story for a bag strap, key accessory, pouch, or removable handle. The final fit should always be approved against the matching D ring or loop before bulk production.
Depending on buyer vocabulary, the fitting may also be indexed as a snap hook clasp, snap hook bag fitting, snap hook gold hardware, gold snap hook, snap hook with lock, snap hook lock, spring gate hook, spring gate snap, gate snap hook, snap hook for chain, snap hook and chain connector, snap hook for keys, snap hook key chain hardware, bulk swivel snap hooks, snap hook small, small spring snap hook, quick snap hook, and clasp snap hook. These terms describe adjacent search language; the approved drawing and mechanism remain the final product reference.

A snap hook clasp is a connector with a hinged gate that opens to receive a ring, loop, or bar and returns to a closed position. In bag hardware, the hook is normally selected together with the strap eye, the mating ring, and the intended material thickness. The category includes several mechanisms, so “snap hook clasp” should not automatically be treated as a jewelry press-button clasp.
Eye width controls how a webbing end, leather tab, cord, or chain connector passes through the fitting. The nominal strap width is only a starting point. Folded leather thickness, stitching, edge paint, and the direction of pull can change the required clearance. A buyer should check the finished strap assembly rather than choosing hardware by the outside dimension alone.
| Point of comparison | Spring gate hook | Typical press-button clasp |
|---|---|---|
| Opening action | Gate or lever returns under spring force | Usually a thumb-operated trigger |
| Visual language | Hardware and strap connector | Often jewelry, lanyard, or small accessory clasp |
| Selection focus | Gate opening, eye width, shaft and mating ring | Clasp size, ring, spring and chain compatibility |
| Typical bag use | Detachable straps, handles, pouches and charms | Small chains, charms and lightweight attachments |

The gate is the moving closure element at the hook nose. When the side lever is moved to its opening position, the gate clears the entry point. When released, the spring mechanism returns the gate toward the closed position. This is why the product should be described as a side-operated or spring-gate design, not as a press-button clasp.
The lower eye is the strap connection point shown in the supplied drawing. It is approximately 30 mm nominal inside, while the upper hook opening is approximately 9.5 mm. The lower eye appears to rotate around the central shaft; DG Buddy should confirm the usable rotation range and any permitted side play on the production drawing before the specification is treated as final.
| Decision point | Current DG-SH030 direction | When another option may be better |
|---|---|---|
| Material | Zinc alloy for a shaped fashion fitting | Choose stainless steel when verified outdoor corrosion resistance is essential |
| Finish | Light gold for a soft luxury appearance | Choose gunmetal or silver for a cooler visual system |
| Operating action | Side-operated spring gate | Choose a standard trigger snap when a thumb trigger is required |
| Lower connection | Approx. 30 mm nominal inner eye | Choose a smaller eye for narrow cords or small charms |
| Hook entry | Approx. 9.5 mm opening shown | Choose a larger gate opening for a thick bar or large D ring |
| Visual scale | 30 mm nominal size and 16.8 g shown | Choose a lighter mini snap hook for small pouches or jewelry |
| Use environment | Fashion bags, straps and accessories | Use tested load-rated hardware for safety-critical or climbing use |
| Customization | Suitable for custom plating, mold and packaging review | Stock-only parts may be faster for low-volume trials |
| Procurement | OEM individual hardware, MOQ 1000 pcs | Retail packs may suit hobby or one-off projects |

| Drawing reference | Shown value | Why it matters during development |
|---|---|---|
| Nominal size | 30 mm | Controls the visible scale of the connector and the space required beside the bag body. |
| Hook opening | Approx. 9.5 mm | Shows whether a D ring, loop, or bar can enter without forcing the gate. |
| Center eye | Approx. 30 mm nominal inside width | Helps match the fitting to a strap, folded leather tab, chain or webbing end. |
| Additional body reference | 38.8 mm shown | Supports pattern clearance and visual proportion; the datum should be confirmed on the final drawing. |
| Wire/material diameter | Not specified in supplied image | Must be confirmed because it affects edge strength, appearance and plating coverage. |
| Thickness | Not specified in supplied image | Needed to assess folding clearance, hardware stacking and contact with leather. |
| Unit weight | 16.8 g | Helps estimate finished bag feel, sample freight and total hardware weight. |
Dimensions in the supplied image are reference values, not a substitute for an approved production drawing. The factory should confirm tolerance, shaft construction, gate opening, surface thickness and any load test before the buyer releases a production order.
Zinc alloy is suitable for a curved fitting like this because die casting can form the hook body, lower eye transition, rounded edges and central housing in a repeatable shape. The material choice is not the same as a performance rating. Buyers should separate appearance, dimensional consistency, gate function and load requirements when evaluating the sample.
Light gold is a surface finish, not solid gold. A reliable finish review checks color consistency on the front, side, underside, recesses and moving parts. The preparation of a zinc alloy die casting matters because surface cleanliness and condition influence electroplated finish quality. ASTM B252 describes preparation of zinc alloy die castings for electroplating and conversion coatings and explains why the pre-plating surface affects performance. See the ASTM guide for zinc alloy die-casting preparation.
For a new light gold color, DG Buddy can review a physical reference, a Pantone target, or an approved master sample. The buyer should ask whether the requested appearance is electroplated, painted, PVD, or a combined surface system because each choice changes color, cost, repairability and wear behavior.

For a bag hardware buyer, the manufacturing route explains where appearance and function are controlled:

Suitable for luxury handbag brands: Yes, when the brand needs a custom light gold accent and can approve a finish master sample.
Suitable for fashion brands: Yes, especially for detachable straps, small bags, pouches and accessories where the side-operated gate is part of the design language.
Suitable for OEM factories: Yes, when the buyer can provide strap width, mating ring details, color target, packaging and inspection requirements.
Suitable for small MOQ brands: The fixed DG Buddy MOQ is 1000 pcs, negotiable based on order details. A stock sample can be used for early fit review.
Not the right choice when: The application requires certified climbing hardware, a documented heavy-duty working load, marine-grade corrosion performance, or a different thumb-trigger mechanism.
DG Buddy can review a custom development route from design input to retail-ready packing:

A handbag brand is developing a removable shoulder strap for a structured crossbody bag. Its first sample uses a common press-operated clasp, but the clasp looks visually generic and the strap twists when the bag changes direction. The development team needs a more distinctive connector without making the fitting too large.
The team compares the finished strap width with the approximately 30 mm nominal lower eye, checks the upper gate against its D ring, and asks for a light gold sample. During fitting, the side-operated spring gate becomes a visible design detail instead of a hidden functional part. The brand then confirms the gate action, surface appearance, central shaft movement, packaging protection and production tolerance before approving the bulk order.
For pet accessories, a pet-accessory connector concept may be considered only after the buyer defines the required load and testing. The pictured part should not be marketed as heavy-duty or safety-rated solely because it is metal. Application, test data and intended use must match.
The DG Buddy MOQ for this individual hardware item is 1000 pcs, negotiable based on order details. The final quantity may depend on finish, logo process, packaging and whether the order uses an existing mold or requires a new development. Buyers should send the target quantity, light gold reference, strap application and packaging plan so the project team can confirm the most practical quotation route.
Technical Specifications use a sample time of 5–7 Days for an opening or customized sample. Stock samples are usually faster, normally 1–3 days, but they still need freight time. Free stock samples are available. Custom sample fees are fully deductible from bulk orders, while courier charges are borne by the customer. The production sample should be approved for both surface and gate function.
Yes. The OEM review can cover a Custom Mold, Laser Logo, Emboss Logo, Deboss Logo, Oil Filling and a selected Electroplating finish. The available logo method depends on the curved housing, clearances around the moving gate and the size of the mark. Send a drawing or reference sample first. DG Buddy can then review tool feasibility, sampling cost, surface sequence, tolerance and the best location for a durable brand mark.
The standard packaging is Pearl Foam + OPP Bag + Export Carton or Customized Packaging. Separating the fittings helps reduce metal-to-metal rubbing and protects the light gold surface during handling and transportation. If the project uses retail boxes, hang tags, barcodes or a private-label pack, those requirements should be specified before production so the packing method, carton marks and inspection plan can be aligned.
We maintain quality certification documentation and are happy to provide the current valid certificates upon request during your sourcing evaluation. Certification needs depend on the destination market, material, finish and customer specification. Buyers should request the current documents rather than relying on a generic statement. Any required test method, salt spray duration, plating condition or restricted-substance review should be agreed with the project team before the order is released.
Production Time is 10–15 Days and Delivery Time is 10–15 Days under the DG Buddy fixed business information. The actual schedule should be confirmed against the approved sample, mold status, finish, logo, packing and order quantity. A new plating color or custom packaging may add coordination time. The quotation should state the production start point so the buyer knows whether the schedule begins after artwork approval, sample approval, or deposit confirmation.

DG Buddy has nearly 20 years of OEM development experience in handbag hardware and custom metal parts. The useful advantage is not a generic “high quality” claim; it is the ability to discuss mold geometry, gate clearance, shaft movement, polishing, plating, packaging and inspection as one development process.
For a fitting with a moving gate and visible light gold surface, responsive communication matters because a small change in the opening, eye, spring or plating contact can affect the finished bag. DG Buddy supports fast sampling, engineering discussion, QC inspection, private-label packing and long-term OEM cooperation. Free stock samples are available; custom sample fees are fully deductible from bulk orders.
If you already have a technical drawing, strap sample, D ring or approved light gold reference, send it to DG Buddy for a fit and finish review. If you are still evaluating suppliers, share your target quantity, logo method, packaging requirement and delivery window. We can review whether the existing DG-SH030 direction is suitable or whether the hook opening, lower eye, plating or mold should be adjusted before sampling.
| Field | Specification |
|---|---|
| Brand | DG Buddy |
| Product Name | Light Gold Side-Operated Snap Hook Clasp |
| Model | DG-SH030 |
| Product Category | Snap Hook Hardware / Individual Hardware |
| Material | Zinc Alloy |
| Weight | 16.8 g per piece |
| Structure | Spring gate, side lever, central shaft and lower eye |
| Operating Mechanism | Side-operated spring gate; not a conventional press-button clasp |
| Finish | Light Gold |
| Nominal Size | 30 mm reference size |
| Upper Hook Opening | Approx. 9.5 mm |
| Lower Eye | Approx. 30 mm nominal inner width |
| Additional Drawing Reference | 38.8 mm shown in the supplied image; confirm datum on the approved production drawing |
| Application | Handbags, detachable bag straps, pouches, bag charms, key accessories and light-duty fashion hardware |
| Installation Method | Attach the hook to a compatible D ring, loop or bar; pass the strap, leather tab or webbing through the lower eye |
| Manufacturing Process | Die Casting, trimming, grinding, polishing, assembly and electroplating |
| MOQ | 1000 pcs (negotiable based on order details) |
| Sample Time | 5–7 Days for custom or opening samples |
| Production Time | 10–15 Days |
| Delivery Time | 10–15 Days |
| Packaging | Pearl Foam + OPP Bag + Export Carton or Customized Packaging |
| OEM Service | Custom Mold, logo processes, plating colors, private label and packaging development |
Get Fast Quote & Free Catalog