Brand:DG Buddy
Solid brass blazer buttons feature a raised laurel-wreath border and an engravable center panel, available in shank, snap, or 4-hole backs across three Ligne sizes. Nearly 20 years of manufacturing experience, free stock samples available, OEM customization supported.
Custom brass blazer buttons are solid-brass fastening components used on blazers, peacoats, and uniform jackets, distinguished by a raised laurel-wreath border framing a smooth center panel that accepts an engraved logo, crest, or monogram. DG Buddy produces them in three calibrated sizes — 32L, 36L, and 44L — with a choice of loop-shank, snap, or 4-hole sew-through backs. Because the button is die cast or stamped from brass rather than a lighter alloy, it holds engraving detail through repeated dry cleaning and keeps a consistent weight that garment buyers use as a quality signal during inspection.
These custom brass blazer buttons combine a raised laurel-wreath border with a smooth center panel for a crest, monogram, or brand mark. They are designed for tailored blazers, wool coats, peacoats, uniforms, and workwear jackets that need a refined heritage or military-inspired detail. DG Buddy offers 32L, 36L, and 44L sizes, with loop-shank, snap-on, and 4-hole sew-through constructions.
Made from brass, the buttons have a substantial hand feel and provide a dependable base for engraved or raised decoration. Antique gold is the standard finish, while brushed gold and other finishes can be developed during sampling.
Ligne (abbreviated “L”) is the button industry’s standard unit of measurement, equal to 0.635mm. Garment spec sheets reference Ligne rather than millimeters because it’s the historical standard for buttonhole machinery calibration across Europe and North America, so a 36L call-out on a tech pack maps directly to a specific buttonhole cutter setting.
The decorative face — the wreath, the dome curvature, the engraving panel — is one mold. The back is a separate insert. Because DG Buddy keeps the face tooling constant, switching between shank, snap, and 4-hole backs adds only insert cost rather than a full new mold, which is why buyers can order mixed back types on a single PO without a second tooling fee.
| Item | Specification |
|---|---|
| Material | Brass |
| Design | Raised wreath border with a recessed logo panel |
| Sizes | 32L / 36L / 44L |
| Approximate diameter | 20.32mm / 22.86mm / 27.94mm |
| Approximate target weight | 1.96g / 2.92g / 4.08g |
| Back options | Loop shank, snap-on rivet, or 4-hole sew-through |
| Standard finish | Antique gold |
| Customization | Logo engraving, embossing, debossing, laser marking, and oil filling |
The wreath border is formed with a defined relief so the leaf and berry details remain clear after polishing and plating. The center panel is kept smooth and slightly recessed, creating a clean area for a private crest, initials, wordmark, or uniform emblem. This construction is also suitable for wreath pattern metal buttons used across coordinated blazer, coat, and uniform collections.
For brands developing brass buttons with custom logo details, DG Buddy can review the artwork before tooling begins. We check the logo scale, line weight, engraving depth, and relationship between the mark and the decorative border. Keeping the logo area adaptable makes it possible to begin with a stock sample and later move to a private design.
When considering how to choose blazer button size, begin with the garment tech pack and buttonhole dimensions rather than the product photo. Ligne, written as “L,” is the traditional button-industry measurement; one ligne equals 0.635mm.
| Size | Approximate diameter | Common use |
|---|---|---|
| 32L | 20.32mm | Cuffs, lighter blazers, and smaller front buttons |
| 36L | 22.86mm | Standard blazer and tailored jacket fronts |
| 44L | 27.94mm | Peacoats, heavy coats, and statement outerwear |
This ligne size to mm button conversion chart is a useful starting point, but the final selection should also consider fabric thickness, buttonhole length, garment proportions, and the sewing method used in production.
The right back depends on how the garment is assembled. A loop shank leaves space between the button and fabric, which helps with buttonhole clearance on tailored jackets. A snap-on rivet can be applied after a heavier fabric panel has been assembled. A 4-hole sew-through back is a practical option for flat-button sewing lines and automated production.
| Back type | Suitable applications | Production notes |
|---|---|---|
| Loop shank | Blazers, tailored coats, premium uniforms | Allows thread clearance and an elevated button position |
| Snap-on rivet | Peacoats and heavy outerwear | Can be attached after panel assembly |
| 4-hole sew-through | High-volume garment production | Flat sewing and familiar machine setup |
For buyers comparing a shank button vs snap button for blazers, the choice is usually determined by the buttonhole, fabric weight, and sewing line. Buyers looking for shank back brass buttons often choose the loop construction when the garment requires thread clearance, while snap construction is more convenient for certain heavy outerwear processes. The decorative face can often remain the same while the back insert changes.
The brass vs zinc alloy buttons difference is mainly seen in weight, surface character, engraving behavior, and cost. Brass gives a denser hand feel and is a strong choice for premium blazers, uniforms, and outerwear. Zinc alloy can be appropriate for cost-sensitive programs, but its final performance depends greatly on surface preparation and plating quality. A detailed comparison is available in our brass and zinc alloy OEM guide.
Antique gold plating needs an even surface underneath it. The raised wreath, recessed leaves, and domed center can receive the finish differently if polishing is rushed. DG Buddy uses multiple polishing stages before electroplating so that the raised and recessed areas produce a consistent visual tone. Buyers sourcing antique gold coat buttons wholesale can also request finish samples for approval before bulk production.
DG Buddy supports brands as an OEM blazer button manufacturer, from artwork review and mold development through sample approval, production, inspection, and packing. The logo may be engraved, embossed, debossed, laser marked, or oil filled depending on the desired appearance and level of detail. As a custom logo engraved metal buttons manufacturer, we recommend confirming the minimum line width and logo size before the final mold is released.
OEM orders can include mixed sizes or back types when the tooling permits. Private-label options include custom hang tags, barcode-ready packaging, and retail boxes. This makes the product suitable for fashion brands, uniform contractors, garment factories, and designers who need a consistent hardware program rather than a one-time stock purchase.
For programs requiring wholesale brass buttons for military uniforms, we recommend confirming the emblem artwork, color standard, buttonhole dimensions, back type, and cleaning requirements before sampling. The wreath face can be used as a formal stock design, or the center can be replaced with an institutional crest or service mark.
Sample batches can also undergo salt spray testing when corrosion-resistance documentation is required. Quality certification documents can be provided during the supplier-evaluation process upon request.
When comparing an OEM metal button supplier China, look beyond a catalogue image. Confirm the actual material, target weight, size tolerance, logo method, back attachment, plating specification, sample lead time, MOQ, inspection standard, and export packaging. A reliable supplier should also explain how the logo will remain legible after polishing and how mixed specifications will be controlled on one purchase order.
The standard MOQ is 1,000 pieces per design, subject to the selected size, finish, logo complexity, and back-type mix. Stock samples are normally available in 1–3 days. Custom engraved samples generally require 5–7 days after artwork and tooling details are confirmed. Standard production is approximately 10–15 days, followed by delivery according to order volume, destination, and shipping method. Sample charges may be deducted from the bulk order when stated in the quotation.
Yes. Send a vector logo, crest, technical drawing, or garment tech pack for an initial review. We will recommend the most suitable size, logo method, back construction, and finish.
The best button back type for coat manufacturing depends on the production line. Loop shanks suit tailored coats, snap-on backs suit some heavy outerwear, and 4-hole backs suit flat-button automated sewing.
Yes. Stock samples can be used to review size, weight, finish, and back construction before a private logo mold is approved.
Standard export packing uses pearl foam, OPP bags, and export cartons. Custom packaging is available for retail-ready or private-label shipments.
DG Buddy has nearly 20 years of experience developing metal garment and bag hardware. Our OEM development team supports projects from mold design and sampling through finishing, testing, inspection, and export packing. Our quality-control process focuses not only on appearance, but also on consistent weight, reliable back attachment, finish uniformity, and clear communication during development.
If you already have technical drawings or a garment tech pack, send them with your required size, back type, finish, logo, quantity, and destination market. If you are still comparing options, request free stock samples to check the finish and construction before moving to custom tooling.
| Field | Specification |
|---|---|
| Product Name | Laurel Wreath Engraved Brass Blazer Button |
| Model | DG-BB028 (44L/28mm ) |
| Material | Brass |
| Weight | 44L: 4.08g / 36L: 2.92g / 32L: 1.96g |
| Structure | Domed wreath-bordered face with engravable center panel |
| Finish Options | Antique gold, brushed gold (custom finishes available) |
| Size / Dimensions | 32L, 36L, 44L (mm equivalents to be confirmed — see notes above) |
| Application | Blazers, peacoats, uniform jackets, designer outerwear |
| Installation Method | Shank sew-on, snap-fit, or 4-hole sew-through |
| Manufacturing Process | Die Casting / Stamping |
| Surface Treatment | Electroplating |
| Customization | OEM / ODM — custom logo engraving, custom mold |
| Packaging | Pearl Foam + OPP Bag + Export Carton or Customized Packaging |
| MOQ | 3000 pcs (negotiable based on order details) |
| Sample Time | 5–7 Days |
| Production Time | 10–15 Days |
| Delivery Time | 10–15 Days |
